A 4-nozzle dispenser offers four points of dispense which can be used to dispense four different brands of beer or multiples of one brand. It’s up to you.
Bottoms up beer dispensers will never be completely down due to each filler nozzle working independently from the others. Each Bottoms Up Draft Beer Dispenser™ comes with a one year warranty on all parts. The equipment is very simple and repairs can be made easily should anything occur. Over the phone instruction is also available and recommended to insure satisfaction. During the warranty, GrinOn will ship parts as needed and the cost of parts and shipping is covered by GrinOn.
No, not in most cases. Some particular locations do require a new line set to guarantee product performance; line replacement only occurs if current beer lines are in disrepair.
No, it does not take a special keg. All of the equipment used in conjunction with the Bottoms Up Draft Beer Dispenser™ is standard.
Cleaning beer lines with a Bottoms Up Draft Beer Dispenser™ is the same process as cleaning traditional draft beer dispensing equipment. End of shift cleaning: remove and rinse the nozzles in sanitization fluid; store in a safe location until the next use; rinse the drain pan with sanitization fluid wipe down the outside of the dispenser, and drip tray.
Yes. It stops at the pre-set amount determined by the server.
Yes. Each nozzle can be programmed to fill three different sizes; changing the sizes happens with the push of a button.
The nozzle stops filling and resets for the next cup…
Two and four nozzles per unit
Yes, custom graphics and color are available upon request.
Yes Keg coolers, grandstand/counter, GrinOn’s IRP carts and a lot of custom setups.
